Certified according to ISO 9001:2015
Certified quality management system
Certified quality management system
www.tuvsud.com/ms-zert
Transformer Tester ST2829CX (Rental device)
Product number:
63990
EAN:
4260409229136
£329.77*
Goods expected soon
Details
Fachberatung unter
+49 421 277 9999
+49 421 277 9999
Print
Product information "Transformer Tester ST2829CX (Rental device)"
Highlights
- Frequencies: 20Hz - 1MHz
- Basic Accuracy: 0.05%
- 800x480 LCD-color-display
- Measuring Speed: 13ms
- Interfaces: LAN-LXI, USB, RS232, Handler, DCI, (GPIB option)
- LCR option
Specification
- 7-inch 16:9 TFT LCD display with a resolution of 800x480
- Up to 1MHz test frequency, 0.5mHz resolution
- Signal amplitude range: 5mV to 10Vrms, 100μVVresolution
- Test speed is up to 75meas/sec
- Built-in 0-100mA/0-10V bias source (standard) or 1A bias source (optional)
- Diode P/N characteristic detection can test all parameters of network transformer
- Improved high turn ratio and weak coupling transformer test ability
- Improved DCR test ability for low-ohm winding
- Flexible time-labeling system: time of file setting, calibration and deduction can be saved
- Sort the selected scanning parameters
- Flexible deviation and deduction modes
- Multiple handling ways for FAIL cases
- Single parameter test cycle can be used to test a separate winding
- Internal memory for up to 200 setting files and external USB memory for more
- Test data and graphs can be saved as CSV, GIF format to USB memory
- The built-in software provides analysis abilities, such as Cpk, Cp and Ck
- Bar-code reading function can be used to select a setting file or to manage the type of test products
- Parameter setting files are compatible with ST2818X/ST2819X
- Program setting files with your local PC
- Upgrade operation software of USB HOST and RS232C online
- Multiple interfaces are optional for PC communication
- To network multiple testers through LAN-LXI interface
What's in the box
- ST1901B Manual transformer scanning fixture
- ST26005B 4-terminal test fixture
- ST26011A 4-terminal Kelvin test clip leads
- ST26004B 2-terminal test clip leads
- ST26016 Transformer scanning control cable
- ST1901-001 Foot switch
- ST26010 Gilding short board
- Factory calibration certificate
Technical Specifications |
|||
| Model | ST2829AX | 20-Pin Transformer Scanning Test + LCR Test (Optional) ST2829X provides a 10-hour function-experience for LCR test. The experience version will be automatically turned off after 10 hours of using. If you do need this function, please contact our salesmen or distributors and provide your detailed instrument serial number. |
|
| ST2829BX | |||
| ST2829CX | |||
| Basic accuracy (See operation manual) |
LCRZ | 0.05% | |
| DCR, Turn ratio |
0.1% | ||
| Calibration | Warm-up time = 30 minutes, Environment temperature: 23±5ºC, Signal voltage: 0.3Vrms – 1Vrms Zeroing: After OPEN or SHORT Length of test cable: 0 m |
||
| Frequency of test signal |
ST2829AX | Range: 20Hz - 200kHz | Min. resolution: 0.5mHz Accuracy: 0.01% |
| ST2829BX | Range: 20Hz - 500kHz | ||
| ST2829CX | Range: 20Hz - 1MHz | ||
| Output impedance of signal source | 10Ω, 30 Ω, 50Ω, 100Ω(selectable), ±1% @1kHz | ||
| Level of AC test signal |
Normal level | 5mV - 10Vrms | Min. resolution: 100µV, accuracy: 10%xset voltage+2mV |
| 50µA - 100mArms | Min. resolution: 1µA | ||
| Constant level | 10mV - 5Vrms | Min. resolution: 100µV, accuracy: 10%x set voltage+2mV |
|
| 100µA - 50mArms | Min. resolution: 1µA | ||
| DC bias voltage source |
0V - ± 10V | Min. resolution: 0.5mV, accuracy: 1%x set voltage+5mV | |
| 0mA - ± 100mA | Min. resolution: 0.5µA | ||
| DC constant current source (optional) (for diode P/N characteristic test) |
0 - ± 120mA | Min. resolution: 0.5mV, accuracy: 1%x set voltage+5mV | |
| DC bias current source (optional, ST2901) |
0 - ± 1A | Min. resolution: 0.5mA, accuracy: 1%x set voltage+2mA Load open voltage: = 9 V |
|
| Transformer test parameters | Turn Ratio, Turns, Phase, L, C, Lk, Q, ACR, DCR, Balance, Pin Short, Diode P/N | ||
| LCR test parameters | |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR, Turn-Ratio,Phase, Lk | ||
| Display range of DCR | 0.00001 Ω - 999.999 MΩ | ||
| Display range of turn ratio | 1:0.001 - 1000:1 | ||
| Display ranges of LCR parameters | |Z|, R, X | 0.00001Ω - 99.9999MΩ | |
| |Y|, G, B | 0.00001µs - 99.9999s | ||
| C | 0.00001pF - 9.99999F | ||
| L | 0.00001µH - 99.9999kH | ||
| D | 0.00001 - 9.99999 | ||
| Q | 0.00001 - 99999.9 | ||
| θ (DEG) | -179.999º - 179.999º | ||
| θ(RAD) | -3.14159 - 3.14159 | ||
| Δ % | -999.999% - 999.999% | ||
| Diode test | Positive voltage | 0 - 9.9999 V | |
| Negative current | 0 - 99.999 mA | ||
| Measurement speed (=10 kHz) |
Fast: 75meas/ sec(13ms), Medium: 11meas/ sec (90ms), Slow: 2.7meas/ sec (370ms) | ||
| Equivalent circuit | Serial, Parallel | ||
| Range mode | Auto, Hold | ||
| Trigger mode | Internal, Manual, External, Bus | ||
| Average times | 1 - 255 | ||
| Calibration function | Open, Short, Load | ||
| Math operation | Direct reading, ΔABS, Δ% | ||
| Delay time | 0 - 60.000s, 1ms resolution | ||
| Comparator | 10-bin sorting, BIN1~BIN9, NG, AUX | ||
| Bin counter | |||
| PASS/FAIL on front panel, LED indication on scanning fixture | |||
| Memory | 200 sets of LCRZ setting files 200 sets of setting files for transformer scanning 10 sets of GIF files |
||
| Interface | Control interface | HANDLER (optional) on rear panel SCANNER(compatible with TH1901A/B, TH1805A/B transformer scanning fixtures) |
|
| Communication interface |
LAN-LXI, GPIB (optional), USB HOST, RS232C | ||
| Memory interface | USB HOST (USB memory or bar-code scanning) | ||
General Specifications |
|||
| Operating environment |
Temperature | 0°C - 40°C, | |
| Humidity | ≤ 90%RH | ||
| Power supply | Voltage | 99V-121V AC, 198V-242V AC | |
| Frequency | 47Hz - 63Hz | ||
| Consumption | Max. 80 VA | ||
| Dimension (W×H×D) | 400mm×132mm×385mm | ||
| Weight | Approx. 13 kg | ||