Certified quality management system
Luminaire Tester ST400-LG-ACX
Price on request
Details
+49 421 277 9999
The Luminaire Tester ST 400-LG-ACX is designed on standard tests according to VDE, EN and ISO conduct for all kinds of lamps and bulbs. To perform tests in accordance with the luminaire standard EN 60598-1-which Luminaire has all the necessary test modules for these standard test. These modules include a 5kV AC high voltage test with a short circuit current of> 200mA, an insulation test up to 500V DC, a ground bound test with 25A AC, a continuity test and an adjustable source of 0-270V AC / 45 - 65Hz for functional testing of lamps with a current consumption with up to 10A.
The test procedure can be carried out fully automatically and thus guarantees a rapid test procedure in production. Both test plans and results files can be stored on a USB flash drive or on a server on the network. If the network connection is interrupted to the server, the ST400 saves the resulting files locally, as long as has been restored to the connection to the server. After that, all locally stored data is transmitted to the server.
For quick adaptation of the test samples contacting units with socket outlets, test leads with 4 mm laboratory plug or open-ended, or test pistols can be delivered.
Highlights
- Automatic Luminaire Tester
- Test parameter: HVAC, ISO, PE, Continuity, 0-270V Function
- Comfortable 5.7" TFT-Industrial-Touch-Screen
- Manual operation with test plan editor, remote control
via PC and batch tests - Contact and test lead monitoring
- "4-Terminal-Sensing" protective earth test
- Test probe with result LED
- Perfected periphery equipment for PLC, RS232, driver,
printer or customer specific extensions - Norms: EN60065 / VDE 0860, EN 60598 /
VDE 0710, EN60335 / VDE 0686 / EN 50106,
EN60601 / VDE 0750, EN 60950 / VDE 0805 etc. - Optional: DLL, Active-X, USB, LAN
Test Modules
- HV-Module HVA5-100:
- High voltage test AC
- Test voltage 100 - 5000 VAC, potential free
- Trip current 0.1 - 100 mA
- Frequency 45 - 65 Hz
- Transformer power 500 VA, short circuit current > 200 mA
- Electronically regulated, incl. ramp function and active discharge
- Test voltage switched on at zero crossing of voltage
- ISO-Module DC10-CL:
- DC Insulation resistance test
- Test voltage 50 - 1000VDC
- Resistance measurement 0 - 400 MOhm
- Electronically regulated, incl. ramp function and active discharge
- Current limited as detailed in EN 50 191
- PE-Module AC25:
- Protective earth test PE
- Test current 2 - 25A AC
- Resistance limit 1 - 500mΩ
- Switchable to test as detailed in EN 60 204
- Test voltage < 6 V and < 12 V
- Electronically regulated
- 4-Wire-Technology
- Test probe with GOOD-NOT GOOD-LED
- R-Modul DG1:
- Short Circuit and Open Loop test
- Test voltage 0 - 25VAC
- Resistance limit 0 - 100Ω
- Electronically regulated, incl. ramp function and active discharge
- FCT-Module ACX1-5:
- Source for the supply of the 1-phase test object with 10 - 270 V with the Function test
- Test voltage adjustable from 10 - 270 V AC / 45 - 65 Hz
- Continuous voltage regulation, electronic source
- Power 500 VA
- Short circuit test
- Isolating transformer, potential free
- FCT Modul CM1-10:
- Current Consumption test module up to 10 A / 1-phase
- Measurement of current and voltage
Technical specifications
- X4 user interface incl. Windows CE
- All limits freely adjustable
- Multi-function-dial-switch "Navigation Plus"
- Buttons: PASS, FAIL, START, LOCK
- Main switch: "Illuminated LED"
- Signal LEDs: PASSED, FAILED, IN OPERATION, SAFETY CIRCUIT,
POWER ON, KEYLOCK, REMOTE, ERROR - "Power-ON" selftest
- Interfaces back side:
SPS (24V/2A), RS-232, CAN-1 (System upgrades, e.g. relay matrix) - Connectors back side:
2 x HVS06C HV connectors
2 x PE connector (incl. result LED)
1 x safety circuit
1 x WK400 warning lamp connector
1 x redundant earth - Error report: acoustical, optical and via interface
- User management for test plans and settings
- Auto start function
- Internal clock and calendar
- Test time adjustable from 0,1 s - 99 min, endless
- 19" design-casing: metal, light grey, RAL 7035
- Dimensions(WxHxD): 410 x 210 x 435mm
- Power supply: 230V, 50Hz/60Hz
- Weight: 18-35 kg (depends on modules)
- Safety norm in accordance to EN 50 191
What's in the box
- Supply cable
- Manual
- Factory calibration
Related products
- X2 user interface
- Closed front without display
- Version for remote control via PC
- LAN/USB interface included
- Compatible to all ST400 devices
- Devices: series 36 & 400
- Complete library
- License for 1 test system
- Including CD with drivers and manual
- Electrical Safety Tester Calibration (EST)
- HV test, earth bond test, ISO test
- Calibration of parameters: 3
- Calibration certificate in accordance to ISO 17025
- Repair service on request
- Including cable-set for safety tester:
400 series (ST400) - For Installation in test wagon including wiring
- Ergonomically design
- Push-start-buttons: 2
- Normed distance between buttons
- Connecting cable: 2.5 m
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Magnetic contact plug
- Operation current: 32 A AC
- Reliable HV Probe
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191
- Including cable-set for safety tester:
400 series (ST400) - Ergonomically design
- Push-start-buttons: 2
- Normed distance between buttons
- Connecting cable: 2.5 m
- HV-Cable, two-pole
- Length 3 m
- HV-plug HVP06C
- With contact terminal
- 7 kV AC / 10 kV DC, max. 10 A
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Open end for self assembly
- Operation current: 32 A AC
- Side mounting for test waggon or table
- Ergonomically placed
- Probe type: VP400
- Side: left
- Colour: black
- HV-Cable, two-pole
- Length 2 m
- HV-plug HVP06C
- 2 x counter plug
- 7 kV AC / 10 kV DC, max. 10 A
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Battery clamp
- Operation current: 32 A AC
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 670 / 515 / 495 mm
Inside: 565 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring incl. final pos. damping
- Safety limit switch
- CE conform with EN 50191
- Devices: 36 & 400
- 4-pin (sense/source)
- PE connector: PES4
- Lamella plug: 4mm
- Operating current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Lamellar plug: 4mm
- Operation current: 32 A AC
- Devices: 400 series
- Start via control-IO
- With plug: 12-pole
- Access to control interface
- Cable length: 2m
- Triangle design
- With flash arrow
- Material: plactic
- Size: 200mm x 200mm
- Colour: yellow/black
- DIN 40008
- Including cable-set for safety tester:
400 series (ST400), UX36, UH36 - Ergonomically design housing
- 3 pressure clamps L,N and PE
- 230V socket or others on demand
- Connecting cable: 2 m
- Devices: 400 series
- Start via control-IO
- With plug: 12-pole
- Access to control interface
- Cable length: 2m
- Devices: 400 series
- Installation on barricade or plane surface
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 2m
- Devices: 28, 36 & 400
- Wide grip: brass
- Toothed jaws
- Bonding: 30 mm
- For laminated plug
- HV-Cable, two-pole
- Length 2 m
- HV-plug HVP06C
- 7 kV AC / 10 kV DC, max. 10 A
- Side mounting for test waggon or table
- Ergonomically placed
- HV probe type: HTP
- Side: right
- Colour: white
- Devices: 400 series
- Mounted on tube extension
- Total hight of lamps 1170mm
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 3m
- X8 user interface
- 10.4" TFT touch display
- PC with windows7 included
- LAN/USB interface included
- Compatible to all ST400 devices
- Devices: series 36 & 400
- Complete library
- License for 1 test system
- Including CD with drivers and manual
- Rectangle design
- "Danger High Voltage"
- Material: plactic
- Size: 74mm x 210mm
- Colour: yellow/black
- EN50191 / DIN 40008
- For installation in a test wagon including wirign
- Cable-set for safety tester 400 series (ST400)
- Ergonomically design
- Special insulating plastic
- Optical display
- Indicator button
- Text and screen displayed steps
- Single step-mode
- Large PASS-FAIL display
- Network integration
- Data-format: xml / Access / SQL
- Statistic-functions
- Barcorde function
- Devices: Safety Tester ST400
- Remote control via:Ethernet / USB / RS232
- Integration label-printer
- Devices: series 36 & 400
- Complete library
- License for 1 test system
- Including CD with drivers and manual
- Reliable HV Probe without plug
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191
- Including cable-set for safety tester:
400 series (ST400) - Ergonomically design
- Push-start-buttons: 2
- Normed distance between buttons
- Connecting cable: 2.5 m
- Optical display
- Indicator buttons
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Lamellar plug: 4mm
- Operation current: 32 A AC
- Reliable HV Probe
- Highly flexible HV connecting cable
- Operating voltage 10 kV DC / 7 kVAC
- Hard-wearing tungsten test probe
- CE conformity, according EN 50 191
- Side mounting for test waggon or table
- Ergonomically placed
- Probe type: VP400
- Side: right
- Colour: black
- HV-Cable, two-pole
- Length 8 m
- HV-right-angle plug HVP06CW
- Opposite plug: lamellar plug
- 7 kV AC / 10 kV DC, max. 10 A
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Magnet contact
- Operation current: 32 A AC
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 670 / 515 / 495 mm
Inside: 565 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring incl. final pos. damping
- Safety limit switch
- CE conform with EN 50191
- HV-Cable, two-pole
- Length 2 m
- HV-plug HVP06C
- 7 kV AC / 10 kV DC, max. 10 A
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Open end for self assembly
- Operation current: 32 A AC
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 450 / 515 / 495 mm
Inside: 360 / 350 / 450 mm - Completely mounted and wired for plug&play
- PVC design-housing
- Viewable transparent swinging hood
- Damping gas spring
- Safety limit switch
- CE conform with EN 50191
- Conforming to all standards
- Emergency stop for tester
- Load: 16 A
- Cable length: 5 m
- Including cable-set for safety tester:
400 series (ST400), UX36, UH36 - Ergonomically design housing
- Voltage: 6 KVAC, 8 KVDC
- 2 pressure clamps L/N and PE
- 230V socket or others on demand
- Connecting cable: 2 m
- X6 user interface
- Closed front without display
- PC with WIN 7
- LAN/USB interface included
- Compatible to all ST400 devices
- Rectangle design
- "No unauthorised entry"
- Material: plactic
- Size: 200mm x 300mm
- Colour: red/white
- Including cable-set for safety tester:
400 series (ST400) - For Installation in test wagon including wiring
- Start button and protective earth
- Two hand operation with HV probe
- Ergonomically design
- 4-wire-technique
- Start-Stop-function
- Result indication LED
- Cable length: 2m
- Portable posts chain
- Convex base plate
- Colour: Yellow-Black
- Two-parts
- Height: 1100mm / D=32cm
- Devices: 400 series
- LED - warning lamp
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 2m
- X5 user interface
- 10.4" TFT touch display
- PC board with WIN CE
- LAN/USB interface included
- Compatible to all ST400 devices
- Side mounting for test waggon or table
- Ergonomically placed
- HV probe type: HTP
- Side: left
- Colour: white
- Devices: 400 series
- Mounted on test trolley
- Total hight of lamps 1850mm
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 3m