Certified according to ISO 9001:2015
Certified quality management system
Certified quality management system
www.tuvsud.com/ms-zert
LCR Meter ST2822D
Product number:
64060
EAN:
4260689520015
£316.01*
In stock
Details
Fachberatung unter
+49 421 277 9999
+49 421 277 9999
Print
Product information "LCR Meter ST2822D"
Highlights
- Portable LCR-Meter
- Signal frequencies: 100Hz, 120Hz, 1kHz, 10kHz
- Tolerance mode: 1%, 5%, 10%, 20%
- 8.4V Ni-MH 200mAH rechargeable battery
- Powered by rechargeable battery or 12V DC
- Up to 6 hours operation time with fully charged Ni-MH battery
- Charging time approx. 80min
- Backlight LC-Display
- Display modes: Direct, ∆%, ∆ABS
- 4-tolerance comparator
Technical data
- Measuring Parameters: Primary: L, C, R, Z, DCR / Secondary: D, Q, R, θ, ESR
- Testlevel: 0.3, 0.6, 1 Vrms
- Basic accuracy: 0.1 %
- Measuring speed: 4 meas/sec (fast), 1.5 meas/sec (slow)
- Equivalent circuits: series and parallel
- DCR Measuring Speed: 3meas/sec
- DCR: 0.0000Ω-20.000MΩ
- Auto LCR function
- Automatic ranging mode
- Test terminals: 3-terminal, 5-terminal
- Correction: Short and open
- Mini-USB Interface, SCPI compatible
- Firmware update via USB
- Constant 100Ω output impedance
- Automatic power-off function
- Measuring modes: Manual, auto and hold
- Auto-Power-Off: 5 / 15 / 30 / 60 min. / OFF
- Sweep frequency correction function
- Operation temperature: 0°C – 40°C
- Dimensions (W/H/D): 190/90/41 mm
- Weight: 0.35 kg
- Safety: IEC 61010-1:2001, IEC 61326-2-1:2005
What's in the Box
- ST26027A Kelvin test clips
- ST26029C SMD test tweezers
- ST26004F crocodile clip test leads (red/black)
- ST26010B Short plate
- Mini-USB-cable
- Connection cable
- Software ST2822X
| Model | ST2822A | ST2822C | ST2822D | ST2822E |
Function |
||||
| Test Parameter | Primary parameters: L / C / R / Z Secondary parameters: D / Q / R /θ/ ESR | Primary parameters: L / C / R / Z/ DCR Secondary parameters: D / Q / R /θ/ ESR | ||
| Equivalent Circuit | Series and Parallel | |||
| Parameter and Equivalent Mode | Hold, Auto | |||
| Ranging Mode | Auto | |||
| Measurement Terminals | 3-terminal, 5-terminal | |||
| Measuring Speed | 4meas/sec, 1.5meas/sec | |||
| DCR Measuring Speed | --- | 3meas/sec | ||
| Calibration Function | Open, short | |||
| Comparator Function | 1%, 5%, 10%, 20% | 1%, 5%, 10%, 20% | ||
| Input fuse | 0.1A / 250V | |||
| Interface | Mini-USB (virtual serial port) | |||
Test Signal |
||||
| Test Frequency | 100Hz, 120Hz, 1kHz, 10kHz, |
100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
100Hz, 120Hz, 1kHz, 10kHz, |
100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
| Test Level | 0.6Vrms | 0.3 Vrms, 0.6 Vrms, 1 Vrms | ||
| Output Resistance | 100Ω | |||
Display |
||||
| Display | LCD Primary-Secondary dual display, with backlight (ST2822 not available) | |||
| Reading | Max. Primary parameters: 40,000 digits, secondary parameters D/Q Minimum resolution: 0.0001 | |||
| Basic accuracy | 0.25% | 0.1% | ||
Measuring Range |
||||
| L | 0.00µH - 1000.0H | 0.000µH - 1000.0H | 0.00µH - 1000.0H | 0.000µH - 1000.0H |
| C | 0.00pF - 20.000mF | 0.000pF - 20.000mF | 0.00pF - 20.000mF | 0.000pF - 20.000mF |
| Z/R | 0.0000Ω- 10.000MΩ | |||
| DCR | --- | --- | 0.0000Ω- 20.000MΩ | |
| ESR | 0.0000Ω- 999.9Ω | |||
| D | 0.0000 - 9.999 | |||
| Q | 0.0000 - 9999 | |||
| θ | 0.00°- ±180.0° | |||
Power Requirements |
||||
| Battery model | IEC 6LR61, 9V alkaline battery | LH-200H7C,8.4V Ni-MH 200mAH rechargeable battery | ||
| AC power adapter | Input: 220V/50Hz, Output: 12V-15V(100Ω Load) | |||
| Standby Current | Max.2µA | 18µA | 11µA | |
| Battery life | 16 hours (typical) , new alkaline battery, with backlight off | |||
| Auto power off | 5min, 15min, 30min, 60min, OFF available; Factory Default : 5min | |||
| Low voltage indicator | When battery voltage drops below 6.8V, low voltage indicator turns on. | |||
Related products
Kelvin Test Clip ST26027A
£40.86*
- Device: ST2822
- 4-wire-measurment
- Kelvin test leads with terminal
- Cables color coded
- Contacts gold plated
Calibration LCR Meter
£107.56*
- Standard-compliant, multi-vendor calibration based onISO 17025
- Measuring devices: VDE devices, LCR meter, safety tester, bridges, ...
- Traceable to DKD
- Cleaning and adjustment
- Repair service
SMD 4-Terminal-Tweezer ST26009C
£107.56*
- SMD Tweezers
- 4-wire terminal
- Contacts gold plated
- Accessories for LCR meter ST2822