Certified quality management system
Lamp Tester ST400-LG-AC
Price on request
Details
+49 421 277 9999
Highlights
- Automatic Test System
- Test parameter: HVAC, ISO, PE, Continuity, Function
- Comfortable 5.7" TFT-Industrial-Touch-Screen
- Manual operation with test plan editor, remote control
via PC and batch tests - Contact and test lead monitoring
- "4-Terminal-Sensing" protective earth test
- Test probe with result LED
- Perfected periphery equipment for PLC, RS232, driver,
printer or customer specific extensions - Norms: EN60065 / VDE 0860, EN 60598 /
VDE 0710, EN60335 / VDE 0686 / EN 50106,
EN60601 / VDE 0750, EN 60950 / VDE 0805 etc. - Optional: DLL, Active-X, LabView driver, USB, LAN
Test Modules
- HV-Module HVA5-100:
- High voltage test AC
- Test voltage 100 - 5000 VAC, potential free
- Trip current 0.1 - 100 mA
- Frequency 45 - 200 Hz
- Transformer power 500 VA, short circuit current > 200 mA
- Electronically regulated, incl. ramp function and active discharge
- Test voltage switched on at zero crossing of voltage
- ISO-Module DC10-CL:
- DC Insulation resistance test
- Test voltage 50 - 1000VDC
- Resistance measurement 0 - 400 MOhm
- Electronically regulated, incl. ramp function and active discharge
- Current limited as detailed in EN 50 191
- PE-Module AC25:
- Protective earth test PE
- Test current 2 - 25A AC
- Resistance limit 1 - 500mΩ
- Switchable to test as detailed in EN 60 204
- Test voltage < 6 V and < 12 V
- Electronically regulated
- 4-Wire-Technology
- Test probe with GOOD-NOT GOOD-LED
- R-Modul DG1:
- Short Circuit and Open Loop test
- Test voltage 0 - 25VAC
- Resistance limit 0 - 100Ω
- Electronically regulated, incl. ramp function and active discharge
- FCT-Module ACX1-5:
- Continuous voltage regulation, electronic source
- Short circuit test
- Isolating transformer, potential free
- FCT Modul CM1-10:
- Current Consumption test module up to 10 A / 1-phase
- Measurement of current and voltage
Technical specifications
- X4 user interface incl. Windows CE
- All limits freely adjustable
- Multi-function-dial-switch "Navigation Plus"
- Buttons: PASS, FAIL, START, LOCK
- Main switch: "Illuminated LED"
- Signal LEDs: PASSED, FAILED, IN OPERATION, SAFETY CIRCUIT,
POWER ON, KEYLOCK, REMOTE, ERROR - "Power-ON" selftest
- Interfaces back side:
SPS (24V/2A), RS-232, CAN-1 (System upgrades, e.g. relay matrix) - Connectors back side:
2 x HVS06C HV connectors
2 x PE connector (incl. result LED)
1 x safety circuit
1 x WK400 warning lamp connector
1 x redundant earth - Error report: acoustical, optical and via interface
- User management for test plans and settings
- Auto start function
- Internal clock and calendar
- Test time adjustable from 0,1 s - 99 min, endless
- 19" design-casing: metal, light grey, RAL 7035
- Dimensions(WxHxD): 410 x 210 x 435mm
- Power supply: 230V, 50Hz/60Hz
- Weight: 18-35 kg (depends on modules)
- Safety norm in accordance to EN 50 191
What's in the box
- Supply cable
- Manual
- Factory calibration
Related products
- HV-Cable, two-pole
- Length 2 m
- HV-plug HVP06C
- 2 x counter plug
- 7 kV AC / 10 kV DC, max. 10 A
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Battery clamp
- Operation current: 32 A AC
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 670 / 515 / 495 mm
Inside: 565 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring incl. final pos. damping
- Safety limit switch
- CE conform with EN 50191
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Lamellar plug: 4mm
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pin (sense/source)
- PE connector: PES4
- Lamella plug: 4mm
- Operating current: 32 A AC
- Devices: 400 series
- Start via control-IO
- With plug: 12-pole
- Access to control interface
- Cable length: 2m
- Triangle design
- With flash arrow
- Material: plactic
- Size: 200mm x 200mm
- Colour: yellow/black
- DIN 40008
- Including cable-set for safety tester:
400 series (ST400), UX36, UH36 - Ergonomically design housing
- 3 pressure clamps L,N and PE
- 230V socket or others on demand
- Connecting cable: 2 m
- Devices: 400 series
- Start via control-IO
- With plug: 12-pole
- Access to control interface
- Cable length: 2m
- Devices: 400 series
- Installation on barricade or plane surface
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 2m
- Devices: 28, 36 & 400
- Wide grip: brass
- Toothed jaws
- Bonding: 30 mm
- For laminated plug
- HV-Cable, two-pole
- Length 2 m
- HV-plug HVP06C
- 7 kV AC / 10 kV DC, max. 10 A
- Side mounting for test waggon or table
- Ergonomically placed
- HV probe type: HTP
- Side: right
- Colour: white
- Devices: 400 series
- Mounted on tube extension
- Total hight of lamps 1170mm
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 3m
- X8 user interface
- 10.4" TFT touch display
- PC with windows7 included
- LAN/USB interface included
- Compatible to all ST400 devices
- Devices: series 36 & 400
- Complete library
- License for 1 test system
- Including CD with drivers and manual
- Rectangle design
- "Danger High Voltage"
- Material: plactic
- Size: 74mm x 210mm
- Colour: yellow/black
- EN50191 / DIN 40008
- For installation in a test wagon including wirign
- Cable-set for safety tester 400 series (ST400)
- Ergonomically design
- Special insulating plastic
- Optical display
- Indicator button
- Text and screen displayed steps
- Single step-mode
- Large PASS-FAIL display
- Network integration
- Data-format: xml / Access / SQL
- Statistic-functions
- Barcorde function
- Devices: Safety Tester ST400
- Remote control via:Ethernet / USB / RS232
- Integration label-printer
- Devices: series 36 & 400
- Complete library
- License for 1 test system
- Including CD with drivers and manual
- Reliable HV Probe without plug
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191
- Including cable-set for safety tester:
400 series (ST400) - Ergonomically design
- Push-start-buttons: 2
- Normed distance between buttons
- Connecting cable: 2.5 m
- Optical display
- Indicator buttons
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Lamellar plug: 4mm
- Operation current: 32 A AC
- Reliable HV Probe
- Highly flexible HV connecting cable
- Operating voltage 10 kV DC / 7 kVAC
- Hard-wearing tungsten test probe
- CE conformity, according EN 50 191
- Side mounting for test waggon or table
- Ergonomically placed
- Probe type: VP400
- Side: right
- Colour: black
- HV-Cable, two-pole
- Length 8 m
- HV-right-angle plug HVP06CW
- Opposite plug: lamellar plug
- 7 kV AC / 10 kV DC, max. 10 A
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Magnet contact
- Operation current: 32 A AC
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 670 / 515 / 495 mm
Inside: 565 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring incl. final pos. damping
- Safety limit switch
- CE conform with EN 50191
- HV-Cable, two-pole
- Length 2 m
- HV-plug HVP06C
- 7 kV AC / 10 kV DC, max. 10 A
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Open end for self assembly
- Operation current: 32 A AC
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 450 / 515 / 495 mm
Inside: 360 / 350 / 450 mm - Completely mounted and wired for plug&play
- PVC design-housing
- Viewable transparent swinging hood
- Damping gas spring
- Safety limit switch
- CE conform with EN 50191
- Conforming to all standards
- Emergency stop for tester
- Load: 16 A
- Cable length: 5 m
- Including cable-set for safety tester:
400 series (ST400), UX36, UH36 - Ergonomically design housing
- Voltage: 6 KVAC, 8 KVDC
- 2 pressure clamps L/N and PE
- 230V socket or others on demand
- Connecting cable: 2 m
- X6 user interface
- Closed front without display
- PC with WIN 7
- LAN/USB interface included
- Compatible to all ST400 devices
- Rectangle design
- "No unauthorised entry"
- Material: plactic
- Size: 200mm x 300mm
- Colour: red/white
- Including cable-set for safety tester:
400 series (ST400) - For Installation in test wagon including wiring
- Start button and protective earth
- Two hand operation with HV probe
- Ergonomically design
- 4-wire-technique
- Start-Stop-function
- Result indication LED
- Cable length: 2m
- Portable posts chain
- Convex base plate
- Colour: Yellow-Black
- Two-parts
- Height: 1100mm / D=32cm
- Devices: 400 series
- LED - warning lamp
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 2m
- X5 user interface
- 10.4" TFT touch display
- PC board with WIN CE
- LAN/USB interface included
- Compatible to all ST400 devices
- Side mounting for test waggon or table
- Ergonomically placed
- HV probe type: HTP
- Side: left
- Colour: white
- Devices: 400 series
- Mounted on test trolley
- Total hight of lamps 1850mm
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 3m
- X2 user interface
- Closed front without display
- Version for remote control via PC
- LAN/USB interface included
- Compatible to all ST400 devices
- Devices: series 36 & 400
- Complete library
- License for 1 test system
- Including CD with drivers and manual
- Electrical Safety Tester Calibration (EST)
- HV test, earth bond test, ISO test
- Calibration of parameters: 3
- Calibration certificate in accordance to ISO 17025
- Repair service on request
- Including cable-set for safety tester:
400 series (ST400) - For Installation in test wagon including wiring
- Ergonomically design
- Push-start-buttons: 2
- Normed distance between buttons
- Connecting cable: 2.5 m
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Magnetic contact plug
- Operation current: 32 A AC
- Reliable HV Probe
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191
- Including cable-set for safety tester:
400 series (ST400) - Ergonomically design
- Push-start-buttons: 2
- Normed distance between buttons
- Connecting cable: 2.5 m
- HV-Cable, two-pole
- Length 3 m
- HV-plug HVP06C
- With contact terminal
- 7 kV AC / 10 kV DC, max. 10 A
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Open end for self assembly
- Operation current: 32 A AC
- Side mounting for test waggon or table
- Ergonomically placed
- Probe type: VP400
- Side: left
- Colour: black