Certified quality management system
Ground Bond Tester RS36A-10
£1,591.19*
Details
+49 421 277 9999
The ground bond tester RS36A provides a test current of 10A AC with an open circuit voltage of 12V. The probe VP36C includes LED status indicators PASS / FAIL to lighten the work. Thus, inter-visibility is not needed. The 4-wire measurement is integrated into the tester. It also has digital interfaces I/O (PLC), RS232 and CAN. This ground bond tester is ideal for the fast PE final testing.
Highlights
- 10A Ground bond tester
- 4-wire measurement technique
- Comfortable result display inside the testing
- PE test to EN60204
- Four-pin test point
- Seven-pin test point (including status)
- Flexible contacting of the test object via: Schuko plug, quick pressure clamps (flying leads), 2 test probes, alligator clips
- Programmable test parameters
- Rear terminals (optional)
- RS232, digital I/O, CAN
- Connections (PLC, footswitch, test cage, 2-hand operation ...)
PE Test
- Test current:
- Output current: 10A
- Current Type: AC
- Resolution: 0.1A
- Accuracy: 1% ± 1 Digits
- Test voltage: 12 VAC
- Resistance:
- Measurement Range: 1-500 mΩ
- Resolution: 1mΩ
- Accuracy: 1% ± 1 Digits
Technical Data
- IS-IS-Display LED (power, time, resistance)
- Test time: 1-99s / 1-99min and infinitely
- Resolution: 0.1s - 0.1min / 1s - 1min
- Error message: auditory, visual, interface
- Actual and set-point display (current / resistance)
- Test period starts after the test current has been reached completely
- Keypad Lock
- Result outputs programmable
- Various options Buzzer
- LED brightness control
- Start mode (start button, PLC, PC, foot switch selectable)
- Printer Function: language, I.O., N.I.O, always
- Minimum current monitoring
- Program memory for test parameters
- CAN for the expansion stages of development
- Digital I / O interface:
- START / STOP
- PASS / FAIL
- Test runs - Connectors:
- 4-pin-measuring connection
(Contact via an appropriate adapter cable)
- 7-pin-measuring connection
- Foot, test cover, curtain, transfer line, 2-hand bed. - Contacting assistance
- Magnetic linking prism
- Diagonal nippers
- Nippers with steel EZS200
- Nippers with steel EZS400 - Power supply: 230V, 50/60 Hz, 1.5A max.
- Operating temperature: +5 ° to +45 °
- Humidity: 70% (non-condensing)
- Height: 2000 m above sea
- Compact industrial housing (RAL 7035)
- Protection: IP20
- Dimensions (W / H / D): 585/212/325 mm
- Weight: 20 kg
- CE-conformity in accordance with EN 50 191
Electrical safety and standards
- EN 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use
- EN 61326-1 Electrical equipment for measurement, control and laboratory use - EMC requirements
- EN 61000-3-3 / EN 61000-3-2 Electromagnetic compatibility (EMC)
- EN 50191 Erection and operation of electrical test equipment
What's in the box
- Power cable
- Manual
- Factory calibration
Options
- VP36C-2 Earth-Probe (cable 2m, earnings LED)
- LTA36-2 adapter cable with Schuko
- Grounding Clamp EZ200, EZ400
- PE Earth Test Cable in different length
- RS232 connection cable
- DataView software
- CONTROL cable for PLC (SUB-D 3m, 9-pin)
Related products
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Magnetic contact plug
- Operation current: 32 A AC
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Open end for self assembly
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Battery clamp
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pin (sense/source)
- PE connector: PES4
- Lamella plug: 4mm
- Operating current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Lamellar plug: 4mm
- Operation current: 32 A AC
- Devices: series 36 & 400
- Complete library
- License for 1 test system
- Including CD with drivers and manual
- Four pole
- Cable length: 2 - 6m
- Schuko plug
- Used for ground bond tester RS36 and
Isulation resistance tester MR36
- Ergonomic HV test probe
- High voltage testers: SPS electronic, Schleich,
Elabo, ETL, HCK, Erfi and many more - Nominal current: 35A AC
- Flexible safety connection cable
- Resistance-resistant tungsten tip
- Highly insulating plastic
- Button for starting/stopping the measurement
- Result display via LED (red/green)
- For the RS36 protective conductor tester
- Reliable HV Probe
- Highly flexible HV connecting cable
- Current: 35 A AC
- Hard-wearing tungsten test prod
- High voltage proof connection plug
- Housing made of insulated plastic
- CE conformity, according EN 50 191
- Button for Start/Stop of the measurement
- LED for display of results (red/green)
- Used for Ground Bond Tester RS36
- Devices: series 36 & 400
- Complete library
- License for 1 test system
- Including CD with drivers and manual
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Lamellar plug: 4mm
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Magnet contact
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Open end for self assembly
- Operation current: 32 A AC
- Text and screen displayed steps
- Single step-mode
- Large PASS-FAIL display
- Network integration
- Data-format: xml / Access / SQL
- Statistic-functions
- Barcorde function
- Devices: Safety Tester ST400
- Remote control via:Ethernet / USB / RS232
- Integration label-printer
- With magnetic switch
- With screw joint for connection of a cable socket
- For magnetic contacting
- Electrical Safety Tester Calibration (EST)
- HV test, earth bond test, ISO test
- Calibration of parameters: 3
- Calibration certificate in accordance to ISO 17025
- Repair service on request
