Certified according to ISO 9001:2015
Certified quality management system
Certified quality management system
www.tuvsud.com/ms-zert
Milliohmmeter ST2516
Product number:
60940
EAN:
4260254477058
£1,152.94*
Only 5 left in stock
Details
Fachberatung unter
+49 421 277 9999
+49 421 277 9999
Print
Product information "Milliohmmeter ST2516"
Highlights
- Measurement display range: 1µΩ - 2MΩ
- Basic Accuracy: 0.05%
- 4.3" color-touch-display
- Resolution: 10µΩ - 10Ω
- Interface: Handler, RS2323C, USB
- Temperature measurement
Specification
- Measurement speed: FAST 10ms / MED 25ms / SLOW1 (115ms) / SLOW2 (445ms)
- Ranging Mode: Auto, Manual
- Trigger Mode: Internal, Manual, External and BUS
- Handler interface, RS2323C, USB
- Memory function: 30 sets
- Operating temperature and humidity: 0°C - 40°C, ≤90%RH
- Power requirements: Voltage: 190V - 250V / Frequency 50Hz - 60Hz
- Power consumption: 30VA
- Dimensions (W/H/D): 215/89/360 mm
- Weight: 3.3 kg
Measurement display ranges
| Ranges | Resolution | Current | ST2516B | ST2516A | ST2516 |
| 20mOhm | 1µOhm | 1A | x | x | |
| 200mOhm | 10µOhm | 100mA | x | x | x |
| 2Ohm | 100µOhm | 100mA | x | x | x |
| 20Ohm | 1mOhm | 10mA | x | x | x |
| 200Ohm | 10mOhm | 1mA | x | x | x |
| 2KOhm | 100mOhm | 100µA | x | x | x |
| 20KOhm | 1Ohm | 10µA | x | x | x |
| 200KOhm | 10Ohm | 10µA | x | x | |
| 2MOhm | 100Ohm | 1µA | x |
What's in the box
- ST26050 4-terminal Kelvin Test Clips
- Operation Manual
- Temperature sensor
Technical specification |
|||||||||||||
| Model | ST 2516 | ST 2516A | ST 2516B | ||||||||||
Display |
|||||||||||||
| Display | 24-bit, 400 X 272 and touch TFT LCD screen | ||||||||||||
| Reading digits | 4 ½ digits | ||||||||||||
Resistance measurement |
|||||||||||||
| Measurement range | 0.1µΩ - 2MΩ | 10µΩ - 200kΩ | 1µΩ - 20kΩ | ||||||||||
| Resistance range | Current | Resolution | Current | Resolution | Current | Resolution | |||||||
| 20mΩ | 1A | 1µΩ | -------- | 1A | 1µΩ | ||||||||
| 200mΩ | 100mA | 10µΩ | 100mA | 10µΩ | 100mA | 10µΩ | |||||||
| 2Ω | 100µΩ | 100µΩ | 100µΩ | ||||||||||
| 20Ω | 10mA | 1mΩ | 10mA | 1mΩ | 10mA | 1mΩ | |||||||
| 200Ω | 1mA | 10mΩ | 1mA | 10mΩ | 1mA | 10mΩ | |||||||
| 2kΩ | 100µA | 100mΩ | 100µA | 100mΩ | 100µA | 100mΩ | |||||||
| 20kΩ | 1Ω | 1Ω | 1Ω | ||||||||||
| 200kΩ | 10µA | 10Ω | 10µA | 10Ω | -------- | ||||||||
| 2MΩ | 1µA | 100Ω | -------- | -------- | |||||||||
Measurement function |
|||||||||||||
| Resistance measurement time |
FAST:10ms; MED:25ms; SLOW1:115ms; SLOW2:455ms Above data is correct when DISPLAY is OFF; when DISPLAY is ON, 20ms should be added. | ||||||||||||
| Temperature measurement time |
100 ± 10ms | -------- | |||||||||||
| Test terminal | 4-terminal | ||||||||||||
| Average setup | 1-255 | ||||||||||||
| Zero clearing | √ | ||||||||||||
| Range switch | AUTO and Manual | ||||||||||||
| Trigger mode | Internal, Manual, External, BUS | ||||||||||||
| Power frequency selection |
√ (avoid the interference of the power noise) | ||||||||||||
| Setting data storage |
30 groups | ||||||||||||
| Low voltage measurement |
Open voltage: ≤40mV Effective range: 2Ω, 20Ω, 200Ω, 2kΩ |
||||||||||||
| Thermal electromotive force elimination |
√ | ----- | |||||||||||
| Statistics function | AVG, MAX, MIN, OSD(Overall standard deviation), SSD(Sample standard deviation), Process capacity index (Cp, CpK) |
||||||||||||
| Beep state | Comparator, Button | ||||||||||||
| Key lock | √ | ||||||||||||
Temperature measurement |
|||||||||||||
| Temperature measurement1 |
-10.0°C--99.9°C Sensor:PT500 | ----- | ----- | ||||||||||
| Temperature measurement2 |
Analog input:0V--2V Display:-99.9°C -- 999.9°C | ----- | ----- | ||||||||||
| Temperature compensation |
(Convert the resistance measurement value to that one measured under preset temperature) | ----- | ----- | ||||||||||
| Temperature switch | (Temperature rising is gained from resistance test values before and after warming) | ----- | ----- | ||||||||||
Compare Judge |
|||||||||||||
| Comperator | Signal oudput |
HI/IN/LO | |||||||||||
| Beep | Beep mode:OFF,IN,HI/LO | ||||||||||||
| Limit setup mode |
Absolute value high/low limit, Percentage high/low limit +nominal value | ||||||||||||
| Sorting | 3 bins, absolute value/ percentage | ||||||||||||
| External trigger delay time |
AUTO: dependent on range, low voltage mode ON/OFF, OVC (offset voltage compensation) ON/OFF MANUAL: 0.000--9.999s |
||||||||||||
| External input trigger | Rising/Falling edge | ||||||||||||
Interface |
|||||||||||||
| Interface | USB DEVICE, USB HOST, RS232C, HANDLER | ||||||||||||
General specification |
|||||||||||||
| Temperature/Humidity | 0 - 40°C, ≤90%RH | ||||||||||||
| Temperature/Humidity for basic accuracy |
23±5°C ≤80%RH |
||||||||||||
| Power | Voltage | 90 - 110V, 190 - 220V | |||||||||||
| Frequency | 50Hz/60Hz | ||||||||||||
| Consumption | 30 VA | ||||||||||||
| Dimension | 215mm×89mm×360mm(net size) 235mm×104mm×360mm(with foam sheath) | ||||||||||||
| Weight | 3.6kg | ||||||||||||
Related products
Calibration Ohmmeter
£65.53*
- Standard-compliant, multi-vendor calibration based onISO 17025
- Several measurement ranges
- Ohmmeter
- Traceable to DKD
- Cleaning and adjustment
- Repair service
ST®Meter 3.0 Plus
£239.71*
- Comfortable measurement software with special functions
- "Frequency Sweep" / "Analyzer Function"
- Data display, data logging, analysis, report
- Runtime chart, e.g. cooling curves
- Language: English / German
- Communication via RS-232 and USB
- Export file: CSV, Excel
- Application upgrade in order to your requirements
Mounting Frame SMF30
£164.23*
- Robust 19" mounting frame
- Metal powder coated
- Device mounting front side
- Devices: ST2830, ST2515, ST2683, ST2516
- Color: RAL7035 light gray
- Height: 3 HE
Kelvin Test Clips ST26050
£98.70*
- Devices: ST2515, ST2516
- 4-wire-measurement
- Kelvin test leads with banana plug
- Contacts are gold plated
- Cable protection
- Jaw dimension: 10 mm long, 2.5 mm wide, 2 mm high
SMD Low-OhmTweezer ST26110
£131.88*
- 4-wire-measurement
- Kelvin test leads with banana plug
- Contacts are gold plated
- Cable protection
- Jaw dimension: 10 mm long, 2.5 mm wide, 2 mm high
Low-ohm Micro-Clip Leads ST26065
£186.63*
- 4-wire-measurement
- Kelvin test leads with banana plug
- Contacts are gold plated
- Cable protection
- Jaw dimension: 10 mm long, 2.5 mm wide, 2 mm high
Transport Case Milliohmmeter/Multimeter
Price on request
- Milliohmmeters: ST2515, ST2516, ST2516B
- Multimeters: ST1941, ST1942, ST1951, ST1952, ST1961, ST1963
- Battery Testers: ST2523, ST2523A
- Robust transport case
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 central butterfly locks at the front
- 2 locking hinges at the rear
- 1 HighEnd case handle at the front