Certified quality management system
.jpg "ST2883-01_(4)")
_400x400.jpg "ST2883-01_(4)")
Surge Tester ST2883S8-5
€4,150.00*
Details
+49 421 277 9999
The Surge Tester ST2883-S8 can operate directly from a standard browser with LAN LXI. With the generous coloured 7 "TFT display you can see directly all data and curves.
Features
- The first provider of impulse winding tester from low voltage of 30V to high voltage of 10kV, single channel to multichannel in this industry (Max.:8 channels)
- First winding tester compatible with LXI standard
- Impulse voltage of 100V~5000V
- Channel: 8
- Each channel can be programmed and controlled as highterminal, low-terminal and OFF
- 20 test procedures can be added at most
- 65k color 7” TFT wide display screen
- Up to 200Msps waveform sampling rate
- Maximum measuring speed: 6meas/sec
- Storage depth of 6k Bytes
- High bandwidth analog acquisition circuit
- High-fidelity corona extraction algorithm (patent technology)
- Four waveform comparison methods
- Automatic storage of instrument parameters
- Measurements on voltage, time and frequency
- Amplification, stretch and movement of the waveform for accurate display
- Multi-sample average, average processing of 32 standard waveforms
- Destructive testing for your correct choose of voltage
- Use demagnetized impulse to ensure the conformity of tested waveforms
- Login of different user right for easy management
- 20 groups of instrument files can be stored and automatically loaded
- Screen information can be stored in USB disk (COPY key)
- System firmware can be automatically upgraded through USB-disk
- Four selectable display interface effects
- Foot control interface for easy measurements
- Handler interface to realize on-line operation
- RS232C, USB Device and LAN interface to realize remote control
What's in the box
- ST2881-001 Footswitch
- ST2883-01 test clip leads
- 8x ST90003R
- Connection lead
- Manual
Spezifikation |
|||||
| Modell | ST2883S8-5 | ST2883S4-5 |
|||
| Impuls Spannung | 100V-5000V 10V Schritte |
||||
| Spannungsgenauigkeit | ±(5% SOLL-Wert +15V) | ||||
| Rücklesegenauigkeit | ±(5% IST-Wert +15V) | ||||
| Kanäle | 8 | 4 | |||
| Induktivitäts-Testbereich | ≥10µH | ||||
| Impulsenergie | Max.: 0.25 Joule | ||||
| Testgeschwindigkeit | 6 /sec (single channel, single step) | ||||
| Impulse | Max.: 32 | ||||
| Ausgangswiderstand | 5MΩ | ||||
| Display | 800x480, 65k-Farben-TFT; Signal-Anzeigebereich: 600x256 | ||||
| Signalerfassung | Abtastrate: Max. 200Msps, 8 Level einstellbar Auflösung: 8 Bits Speicher: 6k Bytes Durchschnitt: 1 to 32 |
||||
| Vergleichsmethoden | Vergleich mit Standardkurvenform: • Bereich-Größen-Vergleich • Differenzflächen-Vergleich • Korona-Entladungs-Vergleich • Differential-Phasen-Vergleich |
||||
| Wellenformmessung | Spannung/Frequenz/Zeit | ||||
| Trigger Modus | Manuell/Extern/Bus/Intern | ||||
| Fehler-Erkennungs-Output | Pass/Fail Display/LED/Alarm | ||||
| Messstatistiken | Statistiken von Messergebnissen | ||||
| Speicher | 20 Gruppen von Standard-Signaldaten und Geräteeinstellungen können im internen nichtflüchtigen Speicher abgelegt werden. USB-Flash-Speicher kann als externer Speicher genutzt werden. |
||||
| Schnittstellen | Handler, RS232C, USB, USB Host, LAN | ||||
Versorgung/Verbrauch |
|||||
| Versorgung | 220V ±10% 50Hz/60Hz ±5% | ||||
| Verbrauch | ≤200VA | ||||
Allgemein |
|||||
| Arbeitsumgebung | Temperatur | 0°C - 40°C | |||
| Sicherheit und elektromagnetische Verträglichkeit | IEC61010-1:2001,IEC61326-2-1:2005 | ||||
Related products
- Standard-compliant, multi-vendor calibration based on ISO 17025
- Surge Tester
- Traceable to DKD
- Cleaning and adjustment
- Repair service
- Devices: surge voltage tester ST2883
- Analysis software for the evaluation of test results
- Storage of measurement results on the PC
- Operating systems: Win 7, Win 10
- Save as: CSV, PNG, BMP JPEG
- Basic functions:
- Std Wave, Comperator, Area Size, Zone Diff., Corona, Phase Diff.
- Parameter settings: Voltage, Test imp., Erase imp. time
- Secure interface: RS232
- Easy to install
- Robust 19" mounting frame
- Metal powder coated
- Device mounting front
- Devices: ST2829, ST2829XX, ST2883
- Color: RAL7035 light gray
- Height: 4 HE
- Devices: ST2883
- Voltage: 10,000 VAC
- Cross section: 4 mm²
- Length: 1.50 m
- HV cable red with:
- HV plug white
- Kelvin Test Clips
- HV cable black with:
- HV plug black
- Kelvin Test Clips
- Devices: Surge Tester ST2883-1, ST2883-5, ST2883-10, ST2883S4-5, ST2883S8-5
- Robust transport case
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 central butterfly locks at the front
- 2 locking hinges at the rear
- 1 HighEnd case handle at the front
- Extension of GPIB interface
- For hipot tester,
Impedanz analyzer, ohmmeter,
LCR meter, multimeter