Certified quality management system
Sine encoder card SPG502
€79.00*
Details
+49 421 277 9999
Sinusoidal incremental encoders enable a very precise representation of their output signal, since unlike an ABZ encoder, they generate analog sine signals instead of digital pulses, which allow the position to be determined much more precisely by interpolation. If additional SinC and SinD outputs are available, the rotor position can also be determined directly, without having to wait for a reference pulse, as with a UVW encoder, in addition to the angle and direction of rotation.
Highlights
- Compatible with ST600 series frequency inverters
- Sinusoidal encoder with/without C/D signals
- Voltage: 5VDC
- Intuitive installation thanks to plug and play
Specifications |
|
|
User interface |
Terminal block |
|
Distance |
3.5mm |
|
Technique |
Push-in clamps |
|
Cable cross section |
16-26 AWG |
|
Maximum frequency |
SINA/B: 200 kHz, SINC/D: 1kHz |
|
Voltage |
SINA/B/C/D 0.6-1.2Vpp; SINR 0.2-0.85Vpp |
Terminal designation |
|
|
Clamp |
Description |
|
A1+ |
Encoder output SINA, signal positive |
|
A1- |
Encoder output SINA, signal negative |
|
B1+ |
Encoder output SINB, signal positive |
|
B1- |
Encoder output SINB, signal negative |
|
R1+ |
Encoder output SINR, signal positive |
|
R1- |
Encoder output SINR, signal negative |
|
C1+ |
Encoder output SINC, signal positive |
|
C1- |
Encoder output SINC, signal negative |
|
D1+ |
Encoder output SIND, signal positive |
|
D1- |
Encoder output SIND, signal negative |
|
PWR |
Power supply encoder 5V, max. 150mA |
|
PGND |
|