Certified according to ISO 9001:2015
Certified quality management system
Certified quality management system
www.tuvsud.com/ms-zert
Milliohmmeter ST2515
Product number:
61236
EAN:
4260254479687
€1,890.00*
In stock
Details
Fachberatung unter
+49 421 277 9999
+49 421 277 9999
Print
Product information "Milliohmmeter ST2515"
Highlights
- Maximum accuracy: 0.01%
- Temperature accuracy: 0.1°
- Minimum resolution: 0.1µΩ (resistance)
- Low-resistance test mode can effectively protect DUT
- Multiple measurement combinations of R, LPR, T
- 4.3" and 4-wire touch LCD screen
- LCD resolution: 480×272
Secification
- Temperature compensation (TC)
- Temperature conversion (Δt)
- Maximum sample rate: 50samps/sec
- Offset voltage compensation (OVC)
- Customer self-correction (0 ADJ)
- Simultaneously output compare results of 10 bins (OVER, PASS and BEEP)
- Statistics function: CpK, Cp
- 30 groups of parameter files can be saved and loaded
- Screen information can be stored on U-disk
- Data save function brings convenience for saving measurement result
- Automatically update operation software through USB HOST
- Intelligent detection for test state error
- Flexible and convenient file operation system
- Handler interface realizes on-line operation
- Interfaces such as LAN-LXI, RS232, USB HOST, USB Device, GPIB (option)
What's in the box
- ST26050 4-terminal Kelvin Test Clips
- Operation Manual
Technical specification |
||||||||||
| Model | ST2515 | ST2515A | ST2515B | |||||||
Display |
||||||||||
| Display | 24-bit, 400 X 272 and touch TFT LCD screen | |||||||||
| Reading digits | 5 ½ digits | |||||||||
Resistance measurement |
||||||||||
| Measurement range | 0.1µΩ --110M Ω | 1µΩ --10M Ω | ||||||||
| Resistance range | Current | Resolution | Accuracy Rd%+FS% |
Current | Resolution | Accuracy Rd%+FS% |
||||
| 20mΩ | 1A | 0.1µΩ | 0.25+0.015 | -------- | ||||||
| 200mΩ | 1µΩ | 0.25+0.006 | ||||||||
| 200mΩ | 100mA | 1µΩ | 0.35+0.010 | 100mA | 1µΩ | 0.10+0.050 | ||||
| 2Ω | 100mA | 10µΩ | 0.035+0.004 | 100mA | 10µΩ | 0.05+0.020 | ||||
| 20Ω | 10mA | 100µΩ | 0.025+0.004 | 10mA | 100µΩ | 0.03+0.010 | ||||
| 200Ω | 1mΩ | 0.01+0.002 | 1mΩ | 0.03+0.005 | ||||||
| 2kΩ | 1mA | 10mΩ | 0.01+0.0015 | 1mA | 10mΩ | 0.03+0.005 | ||||
| 20kΩ | 100µA | 100mΩ | 0.01+0.002 | 100µA | 100mΩ | 0.03+0.005 | ||||
| 100/200kΩ | 1Ω | 0.01+0.003 | 1Ω | 0.03+0.005 | ||||||
| 1/2MΩ | 10µA | 10Ω | 0.25+0.001 | 10µA | 100Ω | 0.05+0.020 | ||||
| 10MΩ | 1µA | 100Ω | 0.25+0.006 | 1µA | 100Ω | 0.05+0.020 | ||||
| 100MΩ | 100nA | 1kΩ | 2.5+0.060 | -------- | ||||||
Measurement function |
||||||||||
| Resistance measurement time |
FAST: 20ms; MED: 166ms; SLOW: 500ms Above data is correct when DISPLAY is OFF; When DISPLY is ON, 20ms should be added. |
|||||||||
| Temperature measurement time |
100 ± 10ms | |||||||||
| Test terminal | 4-terminal | |||||||||
| Average setup | 1-255 | |||||||||
| Zero clearing | √ | |||||||||
| Range switch | AUTO and Manual | |||||||||
| Trigger mode | Internal, Manual, External, BUS | |||||||||
| Power frequency selection |
√ (avoid the interference of the power noise) | |||||||||
| Setting data storage |
30 groups | |||||||||
| Low voltage measurement |
Open voltage= 60mV Effective range: 2Ω, 20Ω, 200Ω; 2kΩ |
----- | ||||||||
| Thermal electromotive force elimination |
√ | |||||||||
| Statistics function | AVG, MAX, MIN, OSD(Overall standard deviation), SSD(Sample standard deviation), Process capacity index (Cp, CpK) |
----- | ||||||||
| Measurement error detection |
√ (Detect the measurement cable has been connected correctly or not.) | ----- | ||||||||
| Multipole connector | √(Noise abatement function of high-resistance is optional) | ----- | ||||||||
| Beep state | Comparator, Bin compare, Button | |||||||||
| Key lock | √ | |||||||||
Temperature measurement |
||||||||||
| Temperature measurement1 |
-10.0°C--99.9°C Sensor:PT500 | ----- | ||||||||
| Temperature measurement2 |
Analog input:0V--2V Display:-99.9°C -- 999.9°C | ----- | ||||||||
| Temperature compensation |
(Convert the resistance measurement value to that one measured under preset temperature) | ----- | ||||||||
| Temperature | (Temperature rising is gained from resistance test values before and after warming) | ----- | ||||||||
Compare Judge |
||||||||||
| Comperator | Signal oudput |
HI/IN/LO | ||||||||
| Beep | Beep mode:OFF,IN,HI/LO | |||||||||
| Limit setup mode |
Absolute value high/low limit, Percentage high/low limit +nominal value | |||||||||
| Sorting | 10 bins, absolute value/ percentage | |||||||||
| External trigger delay time |
AUTO: dependent on range, low voltage mode ON/OFF, OVC (offset voltage compensation) ON/OFF MANUAL: 0.000--9.999s |
|||||||||
| External input trigger | Rising/Falling edge | |||||||||
Interface |
||||||||||
| Interface | LAN-LXI, USB DEVICE,USB HOST,RS232C,HANDLER, GPIB (OPTION) |
LAN, USB DEVICE,USB HOST, GPIB(OPTION),HANDLER) |
||||||||
General specification |
||||||||||
| Temperature/Humidity | 0 - 40°C,≤ 90%RH | |||||||||
| Temperature/Humidity for basic accuracy |
23±5°C ≤80%RH |
|||||||||
| Power | Voltage | 110V~220V | ||||||||
| Frequency | 50Hz/60Hz | |||||||||
| Consumption | 30 VA | |||||||||
| Dimension | 215mm×87mm×335mm(net size) 235mm×105mm×360mm(with foam sheath) | |||||||||
| Weight | Approx. 3.6kg | |||||||||
Related products
Calibration Ohmmeter
€79.00*
- Standard-compliant, multi-vendor calibration based onISO 17025
- Several measurement ranges
- Ohmmeter
- Traceable to DKD
- Cleaning and adjustment
- Repair service
ST®Meter 3.0 Plus
€289.00*
- Comfortable measurement software with special functions
- "Frequency Sweep" / "Analyzer Function"
- Data display, data logging, analysis, report
- Runtime chart, e.g. cooling curves
- Language: English / German
- Communication via RS-232 and USB
- Export file: CSV, Excel
- Application upgrade in order to your requirements
Mounting Frame SMF30
€198.00*
- Robust 19" mounting frame
- Metal powder coated
- Device mounting front side
- Devices: ST2830, ST2515, ST2683, ST2516
- Color: RAL7035 light gray
- Height: 3 HE
Transport Case Milliohmmeter/Multimeter
Price on request
- Milliohmmeters: ST2515, ST2516, ST2516B
- Multimeters: ST1941, ST1942, ST1951, ST1952, ST1961, ST1963
- Battery Testers: ST2523, ST2523A
- Robust transport case
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 central butterfly locks at the front
- 2 locking hinges at the rear
- 1 HighEnd case handle at the front
Kelvin Test Clips ST26050
€119.00*
- Devices: ST2515, ST2516
- 4-wire-measurement
- Kelvin test leads with banana plug
- Contacts are gold plated
- Cable protection
- Jaw dimension: 10 mm long, 2.5 mm wide, 2 mm high
SMD Low-OhmTweezer ST26110
€159.00*
- 4-wire-measurement
- Kelvin test leads with banana plug
- Contacts are gold plated
- Cable protection
- Jaw dimension: 10 mm long, 2.5 mm wide, 2 mm high
Low-ohm Micro-Clip Leads ST26065
€225.00*
- 4-wire-measurement
- Kelvin test leads with banana plug
- Contacts are gold plated
- Cable protection
- Jaw dimension: 10 mm long, 2.5 mm wide, 2 mm high