Ground Bond Tester RS36B-50

The ground bond tester RS36B-50 provides a test current of 50A AC with an open circuit voltage of 12V. The probe VP36C includes LED status indicators PASS / FAIL to lighten the work. Thus, intervisibility is not needed. The 4-wire measurement is integrated into the tester. It also has digital interfaces I/O (PLC), RS232 and CAN. This ground bond tester is ideal for the fast PE final testing.

Highlights

• 50A Ground bond tester
• 4-wire measurement technique
• Comfortable result display inside the testing
• PE test to EN60204
• Four-pin test point
• Seven-pin test point (including status)
• Flexible contacting of the test object via:
  Schuko, quick pressure clamps (flying leads)
  2 test probes, alligator clips,
• Programmable test parameters
• Rear terminals (optional)
• RS232, digitale I/O, CAN
• Connections (PLC, footswitch, test cage, 2-hand operation ...)

PE Test

• Test current:
• Output current: 10A - 50A
• Current Type: AC
• Resolution: 0.1A
• Accuracy: 1% ± 1 Digits
• Test voltage: 12 VAC
• Resistance:
• Measurement Range:
  1-500 mΩ (0A - 20A-Range),
  1-200 mΩ (20A - 50A-Range)
• Resolution: 1mΩ
• Accuracy: 1% ± 1 Digits

Technical Data

• IS-IS-Display LED (power, time, resistance)
• Test time: 1-99s / 1-99min and infinitely
• Resolution: 0.1s - 0.1min 1s /. - 1min.
• Error message: auditory, visual, interface
• Actual and set-point display (current / resistance)
• Test period starts after the test current has been reached completely
• Keypad Lock
• Result outputs programmable
• Various options Buzzer
• LED brightness control
• Start mode (start button, PLC, PC, foot switch selectable)
• Printer Function: language, I.O., N.I.O, always
• Minimum current monitoring
• Program memory for test parameters
• CAN for the expansion stages of development
• Digital I / O interface:
  - START / STOP
  - PASS / FAIL
  - Test runs
• Connectors:
  - 4-pin-measuring connection
  (Contact via an appropriate adapter cable)
  - 7-pin-measuring connection
  - Foot, test cover, curtain, transfer line, 2-hand bed.
• Contacting assistence
  - Magnetic linking prism
  - Diagonal nippers
  - Nippers with steel EZS200
  - Nippers with steel EZS400
• Power supply: 230V, 50/60 Hz, 1.5A max.
• Operating temperature: +5 ° to +45 °
• Humidity: 70% (non-condensing)
• Height: 2000 m above sea
• Compact industrial housing (RAL 7035)
• Protection: IP20
  
• Dimensions (W / H / D): 585/212/325 mm
• Weight: 20 kg
• CE-conformity in accordance with EN 50 191

Elektrische Sicherheit und Normen

• EN 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use
• EN 61326-1 Electrical equipment for measurement, control and laboratory use - EMC requirements
• EN61000-3-3 / EN61000-3-2 Electromagnetic compatibility (EMC)
• EN 50191 Erection and operation of electrical test equipment

What's in the box

• Power cable
• Manual
• Factory calibration

Options

• VP36C-2 Earth-Probe (cable 2m, earnings LED)
• LTA36-2 adapter cable with Schuko
• Grounding Clamp EZ200, EZ400
• PE Earth Test Cable in different length
• RS232 connection cable
  
• DataView software
• CONTROL cable for PLC (SUB-D 3m, 9-pin)