Certified quality management system
High Frequency Earth Ground Tester TM25R
€8,890.00*
Details
+49 421 277 9999
Highlights
- Intended for measurement of earth resistance of electricity pylons
- Minimizes the influence of adjacent pylons, connected by the guard cable
- Resistance reading: up to 300 Ω
- Operation fraquency: 25 kHz
- Test currents: 20mA automatic
- USB interface
- Alphanumeric display (LCD)
- Automatic current injection
- Built-in memory and printer
- Rechargeable battery
The Sourcetronic TM25T is an high frequency earth ground tester for operations on overhead pipelines. The association of the individual poles through the lightning rod conventional devices would falsify the measurement. While using conventional equipment, the ground wire has to be disconnected from the mast at the time of measurement. To avoid this risky procedure on power poles, the TM25T was developed. Its operating mode is based on the use of a high frequency measuring current (25 kHz) with the inductive impedance of the ground line. Due to the increase of the impedance with the frequency, the influence of the nearby poles is greatly reduced. The TM25T has a Bluetooth interface and allows remote access via tablet with the BlueLogg software. Furthermore you can create pictures connected to the GPS coordinates of the electric poles as well as recording voice memos for every measurement. Last but not least the robust earth ground tester is equipped with a universal charger and an integrated battery.
What´s in the box
- 4x 50 cm long steel core rods with copper coating
- 1x Rod extractor
- 1x 70 m shielded cable
- 1x 50 m shielded cable
- 1x 30 m cable to current rod
- 1x 70 m cable to auxiliary potential rod
- 1x 50 m cable to auxiliary potential rod
- 1x Cable adapter for current electrode
- 1x Cable for connection to the unknown electrode (Tower)
- 1x AC adapter
- 1x BlueLogg license
- 1x Case to carry accessories
- 1x User guide
| Technical Specifications | |
| Measurement ranges | 0 - 300Ω |
| Operation frequency | 25.000 Hz |
| Test current | 20mA automatic |
| Inductive Component compensation | Through bank of capacitors integrated to the equipment |
| Measurement accuracy | ±2.5% of reading ±1 digit |
| Display | LCD |
| Max. earth resistance of auxiliary rods | 2.000Ω (current rod) |
| Maximum capacity: | 4.2 µF |
| Resolution: | 10nF |
| Built-in memory | It allows for the storage of 2,000 tests readings in its internal NVRAM memory |
| Interfaces | USB and Bluetooth |
| BlueLogg software | Software for remote control via a tablet Compatible with Android 4.0 or higher |
| Power supply | Internal or external rechargeable battery, 12 V Internal battery autonomy: at least 2 hours |
| Battery charger | For 100 - 240 V∼ 50/60 Hz |
| Operating temperature | -5°C to 50°C. |
| Storage temperature | -15°C to 65°C. |
| Humidity | Up to 95% RH (non condensing) |
| Dimensions | 340x295x152mm |
| Equipment weight | Approx. 4.9 kg |
| Accessories | 4x 50 cm long steel core rods with copper coating 1x Rod extractor 1x 70 m shielded cable 1x 50 m shielded cable 1x 30 m cable to current rod 1x 70 m cable to auxiliary potential rod 1x 50 m cable to auxiliary potential rod 1x Cable adapter for current electrode 1x Cable for connection to the unknown electrode (Tower) 1x AC adapter 1x BlueLogg license 1x Case to carry accessories 1x User guide |
Related products
- Devices: Earth Tester TM25R
- Robust transport "trolley"
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 middle butterfly locks at the front
- 2 locking hinges at the rear
- 2 centre folding handles
- Standard-compliant, multi-vendor calibration based onISO 17025
- Several measurement ranges
- Ohmmeter
- Traceable to DKD
- Cleaning and adjustment
- Repair service