umrichter
ST600s | Err.12, what does this message mean, what can be done?
If the error message Err.12 appears on the display of the frequency inverter, it means that the inverter is overloaded. Causes: The […]
ST500 | Power: Motor – Frequency converter
Question: Can a 5.5kW motor be operated with a 7.5kW inverter? Yes, a 5.5 kW motor can be operated with a 7.5 […]
ST500 | Introduction to Operating: By Changing the Target Frequency
To change the target frequency of F0.19 = 50.00Hz (the default factory setting) to e.g. F0.19 = 250.00Hz, proceed as follows: In […]
ST500 | ST®Drive
Error message: “No device could be found”. The appearance in the device manager only means that the RS485 adapter was found. Devices […]
ST500 | Permanent magnet synchronous motor
Permanent magnet synchronous motors can be operated by the ST500 frequency inverter, but only if a rotation or incremental encoder is present […]