ST9000 | Multi-speed function – Simple frequency or change of rotating direction

Multi-speed Function:

Speed1=50Hz, Speed2=40Hz and Speed3=30Hz

 

F0.03 = 6	frequency control on multi-speed
F0.11 = 1	regulator release on terminal clamps
F0.13 = 4	Acceleration time 4 sec.
F0.14 = 4	Deceleration time 4sec
F1.00 = 1	DI1 terminal for the Run command
F1.04 = 12	DI5 selection for multi-speed
F1.05 = 13	DI6 selection for multi-speed
E1.00 = 100	100% of the target frequency F0.19
E1.01 = 80	80% of target frequency F0.19
E1.02 = 60	60% of target frequency F0.19

 

After regulator release to DI1 the drive at the target frequency runs off with a braking and acceleration time of 4sec.

If there is a release via DI5 to DI1, the inverter will run with 40Hz.

A release via DI6 and DI1, causes a frequency of 30Hz.

 

Tags: