ST500 | Display parameters d0.09 and d0.10

The display parameters d0.09 and d0.10 can display two different ranges, namely 0-10 and 0-20.

The display switching is done via the parameter F1.47. Here it is set whether AI1 or AI2 is jumpered to current or voltage. The configuration is done via the units digit and the tens digit. The units digit applies to AI1 and the tens digit to AI2.

In this context:

1 = Current

0 = Voltage

For example, if the current value is to be displayed for d0.09 and the voltage value for d0.10, the parameterization is as follows:

F1.47 = 01

Attention: F7.50 and F7.51 still only function from 0-10, i.e., only when the parameter value for the corresponding input is set to “0”.

Tags: